双馈风机风电场联络线出口故障方向判别

由于双馈风机风电场故障特性与传统同步机存在较大差别,因此传统方向元件应用于双馈风机风电场时存在适应性问题。针对双馈风机风电场存在的频率偏移、等值内阻抗不稳定和弱馈等特点,提出一种基于时域波形相似度的故障方向元件。根据推算的联络线对侧电压与保护安装处记忆电压波形的余弦相似度判断故障方向,能够有效解决双馈风机风电场出口故障方向判别存在的问题。在PSCAD/EMTDC中搭建典型的双馈风机接入系统,仿真结果表明,所提故障方向元件针对不同的故障类型均能有效判断故障方向。     

Synthesis,lattice energy and microwave dielectric properties of BaCu2-xCoxSi2O7 ceramics

BaCu_2-xCo_xSi₂O₇ solid solutions with orthorhombic structure (Pnma) were prepared by solid-state reaction method. The phase synthesis process, structural evolution and microwave dielectric properties of BaCu_2-xCo_xSi₂O₇ ceramics were investigated. Single BaCu₂Si₂O₇ phase was obtained when calcined at 950 °C for 3 h and was decomposed into BaCuSi₂O₆ phase when calcined at 1075 °C for 3 h. The sintering process was effectively promoted when Cu²⁺ was replaced by Co²⁺ and the maximum solubility of BaCu_2-xCo_xSi₂O₇ was located between 0.15 and 0.20. P-V-L complex chemical bond theory and Raman spectra were used to explain the structure-property correlations of BaCu_2-xCo_xSi₂O₇ ceramics. The corrected dielectric constant (ε_r-corr) of BaCu_2-xCo_xSi₂O₇ ceramics decreased monotonously with the susceptibility (Σχ^μ) and ionic polarizability of primitive unit cell. The quality factor (Q × f) increased with bond strength and lattice energy (U_cal), especially the lattice energy of the Si-O bond. The temperature coefficient of resonant frequency (τ_f) was determined by the susceptibility and lattice energy of the Cu/Co-O bond. The following optimum microwave dielectric properties were obtained at x = 0.15 when sintered at 1000 °C for 3 h: ε_r = 8.45, Q×f =58958 GHz and τ_f = -34.4 ppm/°C.     

Framework to manage multiple goals in community-based energy sharing network in smart grid

Smart grid has opened up a new role of “prosumer” in an energy value network, transforming many conventional energy consumers into prosumers, who not only generate green energy but also share the surplus with utilities and other consumers. The concept of a goal-oriented prosumer community group (PCG) has emerged recently as an effective way to fulfill sustainable energy exchange. Such community-based energy sharing networks comprise multiple irreconcilable objectives such as demand constraints, cost constraints, and income maximization. In many cases, one goal may be achievable only at the expense of other goals. This necessitates the development of an effective framework to manage the multiple goals and reduce the gap with their achievement levels. Therefore, in this research paper, an effective framework is developed to negotiate among the multiple goals and thus to define optimal mutual goals for each PCG in a more sustainable manner using multiple-criteria goal programming techniques. Simulation results are presented to illustrate how the methods work in practical situations, where each of the objective measure is given a target value and the unwanted deviations from this set are minimized in an achievement function.     

Designed damping controller for SSSC to improve stability of a hybrid offshore wind farms considering time delay

This paper presents the stability improvement results of hybrid doubly fed induction generator (DFIG)-based and permanent magnet generator (PMG)-based offshore wind farms (OWFs) using a static synchronous series compensator (SSSC). An adaptive-network-based fuzzy inference system (ANFIS) controller of the proposed SSSC is designed to render adequate damping characteristics to the studied system. A frequency-domain approach based on a linearized system model using eigenvalue technique analysis is performed. A time-domain scheme based on a nonlinear system model subject to a three-phase short circuit fault at infinite bus with variations in the signal transmission delays has also been investigated to compare the damping of the studied system in cases of with and without controller. The simulation results with MATLAB/SIMULINK toolbox have been presented. It can be concluded from the simulation results that the proposed SSSC joined with the designed ANFIS damping controller can offer adequate damping performance to the studied hybrid DFIG-based and PMG-based OWFs under severe disturbance.     

Dual-loop self-optimizing robust control of wind power generation with Doubly-Fed Induction Generator

This paper presents a self-optimizing robust control scheme that can maximize the power generation for a variable speed wind turbine with Doubly-Fed Induction Generator (DFIG) operated in Region 2. A dual-loop control structure is proposed to synergize the conversion from aerodynamic power to rotor power and the conversion from rotor power to the electrical power. The outer loop is an Extremum Seeking Control (ESC) based generator torque regulation via the electric power feedback. The ESC can search for the optimal generator torque constant to maximize the rotor power without wind measurement or accurate knowledge of power map. The inner loop is a vector-control based scheme that can both regulate the generator torque requested by the ESC and also maximize the conversion from the rotor power to grid power. An ℋ_∞ controller is synthesized for maximizing, with performance specifications defined based upon the spectrum of the rotor power obtained by the ESC. Also, the controller is designed to be robust against the variations of some generator parameters. The proposed control strategy is validated via simulation study based on the synergy of several software packages including the TurbSim and FAST developed by NREL, Simulink and SimPowerSystems.     

Improved synergetic excitation control for transient stability enhancement and voltage regulation of power systems

This paper proposes decentralized improved synergetic excitation controllers (ISEC) for synchronous generators to enhance transient stability and obtain satisfactory voltage regulation performance of power systems. Each generator is considered as a subsystem, for which an ISEC is designed. According to the control objectives, a manifold, which is a linear combination of the deviation of generator terminal voltage, rotor speed and active power, is chosen for the design of ISEC. Compared with the conventional synergetic excitation controller (CSEC), a parameter adaptation scheme is proposed for updating the controller parameter online in order to improve the transient stability and voltage regulation performance simultaneously under various operating conditions. Case studies are undertaken on a single-machine infinite-bus power system and a two-area four-machine power system, respectively. Simulation results show the ISEC can provide better damping and voltage regulation performance, compared with the CSEC without parameter adaptation scheme and the conventional power system stabilizer.     

A novel fast distance relay for series compensated transmission lines

This paper presents a fast distance relay for series compensated transmission lines based on the R–L differential-equation algorithm using the theory of equal transfer process of transmission lines. The measuring distances based on the proposed algorithm can fast approach the actual value of fault distance when a fault occurs in front of the series capacitor. When a fault occurs behind of the series capacitor, the fault loop, including the series capacitor, does not match the R–L transmission line model, so the measuring distances fluctuate severely. Based on this, the relative position of the fault with respect to the series capacitor can be judged effectively according to the fluctuation range of the measuring distances, and the accurate fault location can be obtained fast. A variety of PSCAD/EMTDC simulation tests show that the new relay has fast operating speed and high accuracy when applied to the long series compensated transmission lines.     

Microwave dielectric characteristics of tungsten bronze-type Ba4Nd28/3Ti18-yGa4y/3O54 ceramics with temperature stable and ultra-low loss

A series of high-k Ba₄Nd_28/3Ti_18-yGa_4y/3O₅₄ (0≤y≤2, BNTG) ceramics with temperature stable and ultra-low dielectric loss were synthesized via the conventional solid-state reaction. The main phase of all BNTG ceramics demonstrated an orthorhombic tungsten-bronze structure, but the impurity phase (gallium-rich phase) was found in BNTG (y = 2) ceramic. Partial substitution of Ga³⁺ for Ti⁴⁺ in B-site was a valid method to improve the temperature stability and dielectric loss of BNTG ceramics. The variation of ε_r values of BNTG ceramics was dominated by the ionic polarizability. The ultra-low dielectric loss (ultra-high Q × f values) was associated with grain size, suppression of Ti³⁺ and impurity phase. The decrease of TCF values was highly dependent on the tilting of Ti-O octahedra and impurity phase. Finally, outstanding combination dielectric characteristics were achieved for BNTG microwave ceramics at y = 1.5 (ε_r = 72.8, Q × f = 14,600 GHz, TCF=+4.1 ppm/°C) and at y = 2 (ε_r = 70.3, Q × f = 15,500 GHz, TCF=+3.9 ppm/°C).